Decorative cart - how to do it yourself? Expert advice on the design of the site (65 photos)

Summer residents seek not only to build a solid and reliable house, but also to decorate the adjacent plot. You can plant a flowering garden, equip flower beds. But you should think about decorating the territory, which will help you make the site more comfortable.

A good solution in the arrangement of the interior would be the installation of a small decorated cart. It can be purchased in a specialized store, ordered from specialists or made independently. We will talk about the last method in our article.

Summary of the article:

Types of decorative carts

There are many options for creating and installing this element near a country house. But the invariable rule is its decoration with flowers or other decorative elements. Depending on the size of the cart for the garden can be:

Small, with a length not exceeding 1 m. Due to its small size, it looks great on small flower beds and lawns. It is this option that is most acceptable as a way to decorate a standard house.
Two, three or four wheel construction. The size is 2-2.5 m. It looks great near the fence or at home.
Large four-wheel model, reaching a length of three or more meters. This is too cumbersome. Therefore, it is advisable to build only if the personal territory is vast.

In the design process, the type and size of the structure must be determined early. Take into account both the area of the allotment, and its workload, as well as the style of home decoration.

How to assemble the design

The key to successful solution of the task is a thoughtful layout. You must rely on the most suitable drawings of decorative carts and observe the specified proportions.

Wheel making

The most difficult step in the design of the layout is the manufacture of the wheel. You can choose the simplest option and cut a circle of the desired diameter from a wooden blank. Drill a hole in the center and seat the wheel on the axle. You can also cut two semicircles, and then connect them together.

But the wheels with the spokes will look most aesthetically pleasing. To make such a model is much more difficult, but on the shoulder of a novice master. First you need to make a template, observing these proportions. To do this, take a sheet of plywood.

On the workpiece, the center of the future wheel is determined and a nail is driven into it. Then you should take a bar, the length of which will be not less than the radius of the desired circle. Two holes are drilled in it - one for a nail located in the center, and the second for a pencil.

Having fixed the bar, it is necessary to draw a circle. Inside draw another one. You need to do this so that you get a wheel rim in natural width.

The resulting circle must be divided into eight equal pieces. You can see as many equal segments on the rim. Under them, cut blocks of 30x80 with a length corresponding to each segment of the rim. Their ends should be filed for convenient connection between themselves in the form of an octagon. Check the quality of the connection.

You can leave the wheels as an octagon, but smooth shapes will be more attractive. Therefore, it is necessary to lay butt all the cells, and to give the blanks a rounded shape along the contour of the circle. In this case, you will get wheels of a natural look. You can see the features of such a model in the photo of a decorative cart.

Wheel assembly

In the center of the wheel circumference you need to place a chock, which will act as a hub. It can also be made from a pre-prepared blank with a jigsaw.

As spokes, you can use ready-made round sticks or parts from an agricultural tool. You can make them yourself on a lathe, but it will take you time and effort.

In the hub and along the inner edge of the rim, drill holes for the needles. Total holes should be 16 - 8 on the rim and hub. The diameter should correspond to the size of the rod. The sticks are inserted into the holes, connecting the center of the wheel with the elements of the rim.

For durability it is necessary to put glue in advance. Then the rim blocks at the ends are also lubricated with glue and firmly pressed. For a better grip, it is advisable to press the structure with heavy parts.

If you have not rounded the wheel circumference, you can do this at this stage. It is enough to smoothly smooth the corners of the octagon. The wheel must be cleaned of glue and carefully sanded. In the same way, the three remaining parts are drawn up.

Bodywork

If you decide to independently decide the question of how to make a decorative cart with your own hands, then you need to prepare for the arrangement of the body. It is necessary to pick up boards for the case and bars for the frame in advance. The frame is assembled based on the drawing. After you lay out the bottom of the boards, they must be fixed with bars with a cross section of 50x50 mm. The cubes that are necessary for the construction of the frame are attached to it.

Such a base must be firmly connected with a variety of fasteners, such as screws or nails. Additionally, the parts should be glued together. The frame is sheathed with boards of the desired length. In conclusion, it is recommended to grind the body and cover it with varnish.

Axis manufacturing and mounting

To fasten the wheels on the cart body, it is necessary to plant them on the axle, for which, for example, shovels from shovels or other garden tools can be used. These cuttings can be cut into pieces according to the required length of the workpiece. In chocks, you need to make holes in which the axes will be fixed. Therefore, the inside of the hub must be flat.

Additionally, 4 more chocks should be prepared. One of the sides of each of them must be beveled. These structural elements are used to be mounted on the body. They are fixed under the axis in order to ensure a stable position of the cart body.

When you are installing a wooden body on an axle, make sure that it is exactly sitting on the chocks. And the place of articulation must be covered with a layer of glue or fixed with screws.

Additional decoration

A decorative cart located in the garden plays the role of an attractive flowerbed. In the back you can install boxes or flowerpots with earth, where to plant beautiful flowers and climbing plants. If you tilt the structure and put flower pots at the bottom, you get a very beautiful imitation of a waterfall.

Other elements or materials may be used as decor elements. For example, wood laid on a cart, exposed figurines, dolls, natural or artificial vegetables will look great.

An original decorative cart on a suburban area will transform the surrounding landscape. You will not only bring an element of originality, but also give your guests a trip to a fairy tale.