Platform for a car - parking and arrangement of parking for cars (60 photos)

When we go to the cottage, we want to spend time calmly and pleasantly with family or friends. Extra care for summer residents is useless. Therefore, you need to reflect on the issue in a timely manner, where your favorite car will be located in order to maintain it in integrity. After all, no one wants to run to the side of the road every hour and check the condition of the car.

In this article we will tell you what the device platform for a car is and how to do it yourself.

Summary of the article:

Arrangement of an open area

The most budget option, not requiring additional efforts to organize parking, is the construction of an open type site. Of course, you will not be able to protect the car from rain, but save on the construction of the frame for the canopy and the implementation of its shelter.

The main problem of the summer resident will also be solved - ensuring the safety of the car and property when you are in the territory of the summer cottage. You can easily enter and leave the territory of your allotment, but you will have access to the vehicle only.

An open area for a car in the country is arranged on the territory of the land plot. The place should be flat and provide ease of check-in / out. But moisture should not stagnate there.

If the territory is fenced, guarded, then it is better to make parking immediately at the entrance gate. So you will not need to equip a wide and durable entrance to the house.

When the issue of protection is not resolved, then a place is chosen near the house - against the wall. She will cover from the wind and side rain with snow. The car will be preserved, but you will lose some land that you could use, for example, under a vegetable garden or flower bed.

Parking lot with grass

If you want to equip the most natural option of parking, then you should level plot and remove a small layer of natural soil. Crushed stone is filled up to the bottom with a layer of up to 10-15 cm, and on top of it - sand of 5-10 cm.

Between layers, as well as on sand, you can lay geotextiles. The lawn grate is laid on top. It must then be covered with fertile soil and sow grass.

Using crushed stone

A more economical and practical option is to fill the site with ordinary rubble. First you need to remove the upper fertile soil layer. Instead, sand is laid, setting a border curb around the perimeter. It will ensure the preservation of the shape of the structure.

After fixing the sidewalk curbs, it is necessary to lay crushed stone with a layer of 15 cm on top of the sand. Moreover, one should raise the level above the ground. To facilitate the movement of cars around the site in the center, lay two strips of concrete slabs under the wheels.

Concrete parking

This is a more durable and reliable construction option. However, it will suit you only if the soil is not exposed to heaving. The fertile soil layer is cut off, sand is put in its place, and then the formwork is installed.

For strength, a reinforcing mesh is placed on top of the sand. The concrete platform is poured with mortar so as to create a layer of 5 cm. Without letting the mixture dry completely, one more level of the reinforcing structure is laid. 5 cm concrete is poured on top.

For heavier cars, such as SUVs, the total height of the concrete platform can be increased to 15 cm.

Paving slabs

An alternative to concrete is paving slabs.It will be indispensable for the arrangement of the site on the ground, which is subjected to heaving. Thanks to the gaps between the blocks, the parking surface will not be disturbed. Also with such a coating provides faster evaporation of moisture.

The tile is laid on a mixture of sand and cement. As a basis, you can use tightly compacted small gravel. For better grip, the blocks are pressed with a rubber mallet.

Features of the use of various materials and the appearance of the structure you can appreciate in the photo of the site under the car.

Carport Equipment

If you live in a country house constantly or often and for a long time come to the cottage, then it is advisable to equip a more capital site for a car. Such a structure should protect the car not only from intruders, but also from the effects of environmental factors - precipitation and direct sunlight.

Our step-by-step instructions on how to make a platform for the car will help you to independently carry out work on the arrangement.

Preparatory work

Choosing a place near the entrance gate or close to the driveway will allow the car to easily call in and turn around. In addition, natural moisture removal will be provided.

You must also pre-calculate the size of the site. For passenger cars, an area of 3x6 m is sufficient. But a larger car will require an area of 4x11 m.

At the initial stage of work with pegs, it is necessary to note the perimeter of the future parking. Pull the twine between the pegs. In the marked area, the topsoil is removed. In its place, a special pillow is formed of several layers:

sand - more than 100 mm thick in several stages with moistening and tamping;
gravel - more than 50 mm.

Formwork

To concreting the site as high quality as possible, it is necessary to exclude the presence of pits and bumps on the surface. Formwork is made of boards with a width of 200-300 mm. Metal pegs 400-500 mm, driven into the soil on both sides of the formwork, will prevent its fall. The step of such fastening is about half a meter. At the edges of the boards, their reliable fixation is required to prevent the flow of the solution.

Alignment of the solution is done by the rule, the standard length of which is up to 1.5 m. Since the site itself will be much larger, it is advisable to provide for the installation of additional guides. Embedded elements are aligned in the transverse direction. Longitudinally, it is necessary to provide a slight slope in the direction of travel - up to 5 degrees. So you facilitate the removal of water from the site.

To strengthen the structure, reinforcement is required. To do this, use a mesh with wire up to 8 mm thick and a mesh size of 100x100 mm. It is recommended to raise the reinforcing layer by 250 mm compared to the base or to make a two-level reinforcement.

The design for dual reinforcement includes a two-layer mesh with jumpers 80 mm in length. They are installed in increments of 45-50 mm. For connections, it is advisable to use PVC clamps.

Concrete laying

All work must be completed in one day, without leaving the solution the next day. During the day, the solution dries up and loses the ability to effectively set in new layers.

The solution can be prepared manually or use a concrete mixer. The platform is poured under the car evenly, but the concrete must be above the level of the guides.

Work is being carried out from the site remote from the road in the direction of entry. Concrete is laid evenly. As a rule, it must be leveled. The entire volume within the formwork must be filled with mortar.

Upon completion of the work, the site is covered with a film of polyethylene. So you exclude cracking, and drying itself will be more even. And precipitation and ordinary moisture will not get on the surface of concrete.

The mixture dries in 5-6 days. The formwork needs to be disassembled and the pins removed. The edges of the site are reinforced with metal corners. Such pads are attached to each other and to concrete rods by welding.

Arrangement of a canopy

For the construction of the roof, it is necessary to bend the support pipe with the desired radius. Such a beam is fastened to vertical supports by bolts or using a welding machine. Using a metal scarf will give greater structural strength.

To mount the frame, you need to build a base. In its quality, concrete columns can be used, which are fixed in the surface of the site. For pillars, you can create a separate foundation of concrete by pouring sand and gravel into the pit.

The frame is installed on the pillars of the base with the help of corners from metal lags or profiled pipes. The roof is made of corrugated board or polycarbonate sheets. It is attached to the "skeleton" of the canopy. After that, all metal parts must be coated with a corrosion-resistant solution and painted.

As the material for the manufacture of the frame can be used wood. But the beam should be at least 50 mm thick with treatment with protective compounds.

To build a reliable and durable platform for a car in the country, it is worth working hard. You can choose the most suitable option for you - to equip an open or outboard parking. But the benefits of such a decision will be obvious - a car protected from encroachments and external influences.