Fence from corrugated board - basic colors, design features and installation rules (95 photo ideas)

Some homeowners find the use of a profiled sheet to fence the site frivolous. This article will tell you why this is an erroneous opinion, as well as teach you to choose the right materials and independently install the fence from corrugated board.

Summary of the article:

Why choose this fence

This building material has many advantages, the most important of which is high speed and ease of installation. To establish a fence of this type under the force of any person.

You do not need to have the qualifications of a builder and have a specialized tool in your arsenal - the standard one, available for every home master, is suitable.

The only difficulty is welding, but if you do not have the apparatus and the corresponding skills, you can do everything without it. Other advantages:

low cost of materials, affordable even with a small budget;
high strength and resistance to aggressive external environment;
durability, resistance to fading;
aesthetic appearance;
the sharp upper edge of the sheet, making it difficult for an attacker to climb over it.

With the right approach to the choice of materials, you can get a great solution that will decorate and make your suburban area original. Look at the photo of the fence from corrugated board to make sure.

Planning and plotting a site fence

Before carrying out work, it is recommended to draw up a schematic drawing. It should be noted on the installation site of the fence from corrugated board, given the topography, the location of buildings, access roads, trees and shrubs.

Be sure to mark on the drawing where the gates, places of lowlands and hills, and the location of the supporting posts will be mounted. Record the height of the fence and the length of its straight sections.

When planning the frame, consider that the profiled sheet has a high windage. The higher the fence, the thicker the transverse logs should be.

If you decide to make a sectional structure, make the distance between the columns a multiple of the width of 1-2 profiled sheets. The dimensions of the corrugated board for the fence vary for each manufacturer - keep this in mind when making calculations.

How to choose the right material

Decking is available in several types, which have their own marking. Before buying, pay attention to the letter and digital indicator characterizing this building material.

Letters are as follows:

“N” - the product has a large thickness and high profile with longitudinal grooves that perform the function of stiffening ribs. It is used in the construction of the bearing roof and walls, as well as for the equipment of fixed formwork of monolithic structures.

It has increased strength, but due to the higher price, the use of such corrugated sheets for fence is economically unjustified.

“C” is a specialized product for wall cladding. It is characterized by a small sheet thickness and a profile height not exceeding 21 mm, which makes it very light. It is mainly used for the construction of fences. The cheapest of the presented, but less durable compared to other types.

"NS" is an intermediate type of product. The average thickness of the sheet is 35-40 mm. Most often used as a loaded element for wall cladding and the construction of awnings, but generally quite universal.It can be used to fence the territory, but most of the strength characteristics of the material here will remain unclaimed.

“MP” is another universal type widely used in construction. Somewhat more expensive "C", but also more resistant to damage. Ideal for the construction of the fence.

The digital indicator includes the thickness and width of the sheet. The length of each manufacturer is set arbitrarily.

For the fence, the best choice would be products with a wave height of 18-21 mm and a sheet thickness of 0.6 mm. Smaller indicators will lead to a decrease in the reliability of the design, and large ones will lead to unnecessary costs without any advantages.

The coverage of the profiled sheet is also different. Remember that galvanized products last no more than 30 years, and with a polyester coating - no more than 50. The latter naturally cost more.

Any material can be used as support pillars, but the simplest, most reliable and affordable is a metal pipe. Its necessary parameters are directly dependent on the expected load.

If you want to use round pipes, their diameter should be from 60 to 100 mm, rectangular - 60x40 or 40x40 mm. Thickness - 2 mm. Fence posts with lower parameters will not withstand gusts of wind.

Cross logs must be made of rectangular pipes with parameters 40x40 or 40x20 mm. Wood products are better not to use, as they tend to rot in the places of fastenings. This will affect the appearance of the professional sheet and reduce its service life.

A metal corner will not do. He will not be able to provide normal wind resistance. The wall thickness of the crossbars should not exceed 2 mm, otherwise it will be difficult to wrap the screws.

To assemble the fence frame under the corrugated board without the use of welding, you will need special brackets and hardware designed for fastening. You can use rivets, bolts or drilling screws.

To screw the profiled sheet, it is better to choose the option with a neoprene rubber gasket. It will provide tight pressure without damaging the surface.

Calculation of materials, approximate cost

To correctly calculate the required amount of building materials and find out how much the fence will cost, do the following:

Determine the required number of sheets. To do this, divide the total length of the fence by the width of the sheet, taking into account the overlap. If the fence is sectional, subtract the total size of the posts. Do rounding up.

Counting must be done in pieces at a given height, and not according to the area of the required amount of corrugated board, otherwise you can easily make a mistake.

Determine the number of racks. In the case of a solid fence, divide its total length by the length of the distance between the posts. It should not be more than 3 meters, otherwise you will have to increase the thickness of the racks and the number of crossbars.

In the case of a sectional fence, the number of racks is determined by the number of sections. Do not forget about the corners, the placement of gates and doors. The height of the racks should be equal to the height of the fence, plus 30% for a depression in the soil.

Count the number of crossbars.With a fence height of less than 2 meters, two crossbars are used, each at a distance of 30 cm from the edge, more than three crossbars. To find out the overall molding, multiply the number of rows of crossbars by the full length of the fence

The required number of brackets is determined by multiplying the number of rows of transverse lags by the number of posts. Count the hardware, given that the sheet is fastened every 2 waves.

Installation work

The process of installing a fence from corrugated board consists of the following steps. At the beginning, clean the surface of the soil from any obstructing objects. If you want the fence to last a maximum period, you need to equip the foundation for it.

For such a construction, a simple strip foundation with a depth of 30-40 cm is suitable. Its width should be equal to or greater than the width of the support column. In the places where the columns are installed, it is necessary to make pillows so that their sole does not come into contact with the soil.

Before installing the racks, treat them with an anti-corrosion compound. At the beginning, put them in the corners and pull the rope along which then align the rest. Check everything with a level or plumb line so that then the fence does not fall over. Now you can fill the solution.

When the concrete dries well, proceed with the installation of the lag. If the fence is solid - this is done end-to-end on the front of the post. If sectional - at the back with the holder. There is another option - on the sides. Its advantage is the ability to mount corrugated board in addition to the column itself. But this process is more labor intensive.

And the last stage is screwing up professional sheets. There are no difficulties here, just press them to the structure and screw them with self-tapping screws. At the end, it is recommended that the fasteners be treated with a special paint to prevent rust.

As you can see, there is nothing complicated in installing such a design. But if you doubt your abilities - it is better to entrust this task to the organization involved in the installation of turnkey fences from corrugated board. Just select the verified one so that then there are no problems.